Views: 20 Author: Site Editor Publish Time: 2025-01-16 Origin: Site
Electric hydraulic tools play an important role in many industrial, construction and emergency rescue operations. They drive the hydraulic system through an electric motor to provide powerful force for cutting, spreading, lifting and other operations. Although electric hydraulic tools improve work efficiency and precision, ignoring safety regulations during operation may cause accidents or injuries. To ensure the safety of workers and the normal use of tools, the following are safe operating regulations for electric hydraulic tools.
1. Preparation before operation
Check the tool status: Before using electric hydraulic tools, operators should check whether the various parts of the tool are intact and ensure that the hydraulic oil, seals, cables, buttons, etc. are not damaged.
Check the power supply: Ensure that the power supply of the electric hydraulic tool meets the requirements. Check whether the power supply voltage is consistent with the voltage calibrated by the tool to avoid equipment damage due to unstable voltage.
Read the operating manual: Operators should be familiar with and follow the operating manual of the tool before use, and understand the function, use and safety warnings of the tool.
2. Wear personal protective equipment correctly
Protective gloves: When operating electric hydraulic tools, protective gloves should be worn to prevent cuts from sharp parts or injuries from vibration of the tool during operation.
Safety glasses: Wear goggles or a mask during operation to prevent hydraulic oil or small particles from splashing into the eyes.
Noise-proof earmuffs: For high-noise tools, earmuffs should be worn to protect hearing.
Protective clothing: Wear appropriate work clothes to avoid clothing being caught in the tool and causing accidents.
3. Safety precautions during operation
Keep the tool stable: During operation, ensure that the electric hydraulic tool is placed stably, and do not allow the tool to be suspended or tilted to avoid accidental drop or loss of control of the tool due to instability.
Avoid fast operation: When using the tool, avoid suddenly applying great force, maintain a steady and uniform operating speed, and prevent the hydraulic system from being suddenly overloaded or damaged.
Confirm environmental safety before operation: Before operation, ensure that the working environment is clean, obstacle-free, and well ventilated. Electric hydraulic tools require good power support and avoid using them in humid or waterlogged environments.
4. Safe operation of hydraulic system
Regularly check the hydraulic oil: During use, the oil level of the hydraulic oil should be checked regularly to ensure that there is enough oil in the hydraulic system. Low hydraulic oil may cause damage to the pump station or malfunction of the hydraulic system.
Clean hydraulic oil: Keep the hydraulic oil clean to prevent contaminants from entering the system and causing blockage or wear. Replace the hydraulic oil regularly to ensure that it meets the tool requirements.
Avoid hydraulic oil leakage: Hydraulic oil leakage should be avoided during operation. If leakage is found, the machine should be stopped and repaired immediately to avoid safety hazards or environmental pollution.
Adjustment of hydraulic pressure: Ensure that the pressure of the hydraulic system is set within a reasonable range. Excessive pressure can cause damage to the tool or serious malfunction, while too low pressure may not be able to complete the task.
5. Safety regulations after operation
Turn off the power: After each use, the power of the electric hydraulic tool should be turned off to avoid accidental start-up.
Clean the tool: After use, clean the outside of the electric hydraulic tool, check whether the hydraulic oil has leaked, and perform necessary maintenance. Regularly check the various components of the tool, especially the cable and hydraulic system, to ensure that they are in normal working condition.
Storing tools: After use, tools should be properly stored in a dry and clean environment to avoid exposure to moisture, high temperature or extremely low temperature to avoid damage to the equipment.
6. Troubleshooting and emergency treatment
Emergency stop: During operation, once a fault or accident is found, the emergency stop button should be pressed immediately to cut off the power supply and stop the operation to ensure the safety of personnel.
First aid for personnel: If an accidental injury occurs, emergency treatment should be carried out immediately, and if necessary, call the emergency number and send to the hospital in time.
Analyzing The Reliability Of Hydraulic Technology In High-Intensity Operations
Comparative Analysis Of Fire Hydraulic Cutters And Other Rescue Tools
The Key Role Of Electric Hydraulic Tools In Emergency Rescue
Safety Operation Specifications For Electric Hydraulic Tools
What Effects Will Low Temperature Environment Have On Hydraulic Rescue Tools?