Let You Know The Skills Of Safe Use Of Hydraulic Tools

Hydraulic tools are widely used in rescue, construction, manufacturing and other industries due to their powerful pressure output and efficient working ability. However, due to their high-pressure characteristics, if used improperly, they may pose safety hazards. Therefore, it is crucial for operators to master the correct use skills. This article will introduce you to the key skills of safe use of hydraulic tools to help you improve safety and efficiency at work.

1. Inspection before use

Before using hydraulic tools, be sure to conduct a comprehensive inspection. It mainly includes the following aspects:

Check the hydraulic oil: The normal operation of the hydraulic system depends on the hydraulic oil. Check whether the hydraulic oil is sufficient and clean to avoid tool failure due to oil contamination or insufficient oil.

Check the hose and joints: Make sure that the hose has no cracks or leaks, and the joints are firmly connected without looseness. Aging or damage to the hose may cause high-pressure oil leakage, increasing safety risks.

Check the tool body: Confirm that the parts of the hydraulic tool are intact, especially whether the key parts such as the blade and clamp are worn or damaged.

2. Proper operation of hydraulic tools

Follow the operating manual: Hydraulic tools of different brands and models have different methods of use and safety requirements. Operators should read the instructions in detail and operate strictly in accordance with the requirements.

Maintain a stable posture: When using hydraulic tools, operators should stand firmly and hold the tools with both hands to avoid imbalance or falling due to high-pressure reaction force.

Avoid overloading: Each hydraulic tool has its rated pressure and load. Do not exceed the equipment's tolerance range to avoid failure of the hydraulic system or damage to the equipment.

3. Prevent high-pressure oil leakage and bursting

The hydraulic system will generate high pressure when it is running. If the hose or seal fails, the high-pressure oil may spray out and cause personal injury. Preventive measures include:

Regularly replace aging hoses and seals and use standard accessories.

Avoid excessive bending or compression of the hose to prevent affecting the flow of oil and causing bursting.

When a leak is found, stop using it immediately, release the pressure before repairing it, and do not disassemble it under high pressure.

4. Use appropriate personal protective equipment (PPE)

When operating hydraulic tools, necessary protective equipment should be worn to reduce the risk of accidental injury:

Protective glasses: prevent hydraulic oil or debris from splashing into the eyes.

Protective gloves: prevent high-pressure oil from penetrating the skin while increasing the stability of the grip.

Protective shoes: prevent tools or heavy objects from falling and hitting the feet.

5. Maintenance and storage

After use, tools should be cleaned in time to remove dust and oil stains, and check for abnormal wear.

When not in use for a long time, tools should be stored in a dry and ventilated place to avoid rust or damage to parts caused by humid environments.

Maintain the hydraulic system regularly, such as replacing hydraulic oil and checking seals to ensure that the equipment is in good condition.

Conclusion

The efficiency and powerful performance of hydraulic tools make them important equipment in many industries. However, safe use is an issue that every operator must pay attention to. Through proper inspection, operation, protection and maintenance, we can reduce safety hazards and ensure the reliability and service life of hydraulic tools. Mastering these skills can not only improve work efficiency, but also protect the safety of yourself and others.